RPT-90480
Western Infrastructure · Water · WO-24396
74
out of 100
Proof Score™
Acceptable
Documentation quality for Water Main Repair
Missing evidence
- ⚠ Capture timestamp could not be verified against device metadata.
- ⚠ Work order number was not spoken or shown on camera.
- ⚠ No before-state footage to compare against the completed work.
- ⚠ Narration does not explain what work was actually completed.
AI recommendations
- “Record directly in the app so the timestamp is signed at capture.”
- “Say the work order number out loud at the start of the walkthrough.”
- “Capture the before-state next time before starting work.”
- “Add 20 seconds of plain-language narration describing the completed work.”
Water work at 4066 Orchard St, Salt Lake City, UT was completed and documented on site by Trevor Dunn. The technician captured a narrated walkthrough of the finished installation, confirmed all connections and equipment were in working order, and verified the work area was cleaned and secured before departure. A small number of evidence gaps were detected and are listed below.
- Completed Water Main Repair at 4066 Orchard St, Salt Lake City, UT
- Located and excavated to expose the failed valve section
- Isolated the main, cut out the damaged section and installed the replacement valve
- Pressure tested the repair and flushed the line until clear
- Backfilled, compacted and restored the surface to grade
- Work area cleaned, debris removed and site secured
- Customer walkthrough narrated on camera for approval
- Ductile iron gate valve
- Repair couplings and gaskets
- Bedding sand and compactable backfill
- Valve box and lid
- Labeling and identification tags
- Mini excavator
- Pipe cutter and torque wrench
- Pressure test gauge
- Kaulii mobile capture — GPS and timestamp signed at recording
- Lockout/tagout applied before any energized or pressurized work
- PPE worn throughout — eye protection, gloves, hard hat where required
- Work zone barricaded and signage posted
- Area cleared and secured before departure
- LowAdjacent pipe section shows external corrosion and should be monitored — noted for monitoring only.
- 1Schedule a follow-up inspection within 90 days.
- 2Add this asset to the preventative maintenance rotation.
- 3Share this report with the property contact for approval.
Alright, this is work order WO-24396. My name is Trevor Dunn with Western Infrastructure. I'm at 4066 Orchard St, Salt Lake City, UT for Water Main Repair. I'm going to walk you through the completed work now. Here's the finished installation — you can see everything is mounted level and secured. Walking around the left side, all the connections are torqued and labeled. Here's the main equipment, and I'm getting a close-up of the nameplate so you have the model and serial on file. Safety-wise, I had lockout applied the whole time I was in the panel, PPE on, and the area was taped off. As far as the work completed, we handled the full water scope, tested everything, and it's reading in range. One thing I did run into was some wear on the adjacent equipment — nothing that affects today's work but worth watching. For follow-up, I'd recommend an inspection in about 90 days. Here's a final overview of the completed job, cleaned up and ready for the customer. That's it for work order WO-24396.
30.2599° N, 97.7799° W
4066 Orchard St, Salt Lake City, UT
Timestamp verified at capture
Scan to open the live online version of this report. Included on the branded PDF.